DMTN-027: Renaming an LSST git Repository

  • John Parejko

Latest Revision: 2016-10-25

Introduction

Say you have a repository named meas_worst and you want to change it to better reflect its usage as the best pipe_tasks package ever: pipe_best. Several other packages depend on meas_worst, and other developers may be currently working on meas_worst ticket branches. This document describes how to rename the repository with minimal disruption to the LSST build system and its users. As always, please ask other developers for clarification or help, if you have any questions during this process.

Before you get to this point, be sure you’ve created an RFC on the topic, gotten agreement about the package rename, and created an implementation ticket in which to do the work.

NOTE: This document assumes you are part of the lsst-dm github organization, but it applies to other groups as well, by replacing lsst-dm with your organization in the text below.

Coordinating with other developers

In order to simplify the post-rename merge process (see Merging in work that had started on the old package), you should attempt to contact those developers that are currently developing on branches of meas_worst. Two places to check for that are via the github active branches interface (from the main repository page, click the branches tab, then the Active tab), and by searching for Jira issues with the meas_worst component (available from the More dropdown next to the search box) that have status “In Progress”, “In Review”, or “Reviewed”. If there are developers with currently active meas_worst branches, contact them to try to coordinate starting your rename after they have pushed their current work on the branch. If this is not possible, they will still be able to merge their changes after the rename, but it will take a few more steps, as detailed further below.

The process

Here are the basic steps:

  1. Fork
  2. Rename package
  3. Create branches in old and new package
  4. Rename code directories and files (commit)
  5. Rename ups files (commit)
  6. Search and replace in source code and docs (commit)
  7. Update lsstsw/etc/repos.yaml
  8. Deprecate old package
  9. Branch dependent packages
  10. Update dependent packages
  11. Test in Jenkins
  12. Update confluence package history page
  13. Get reviewed
  14. Post on Community and Slack
  15. Merge to master and move packages on github

We will go through them one at a time in detail below.

Fork

Fork meas_worst from the lsst organization into the lsst-dm organization via the github interface. When you click the “Fork” button, github should give you a “Where should we fork this repository?” dialog: choose lsst-dm. This is the repository we will work in from now on.

Rename package

Browse to your newly forked meas_worst repository on github and click the Settings tab. Change the repository name to pipe_best and click Rename (the button will be grayed out until you modify the name).

Create branches in old and new package

Clone the new pipe_best repository from github onto your local machine. Create a tickets/DM-NNNN branch of your RFC implementation ticket in both the original meas_worst and the new pipe_best: git checkout -b tickets/DM-NNNN in your local clones of each.

Rename code directories and files (commit)

In your local pipe_best branch, use git mv to rename directories and files (in particular: python/lsst/meas/worst/ and include/lsst/meas/worst) so that they fit within the new namespace implied by the new package name. Git is generally quite intelligent about file renames, so you can do, for example:

cd python
git mv meas pipe
cd pipe
git mv worst best
git commit -a

By committing this step separately, you will make it much cleaner for others to rebase your changes when they switch to the renamed fork.

Rename ups files (commit)

In your local pipe_best branch, rename the files in ups/:

cd ups
git mv meas_worst.build pipe_best.build
git mv meas_worst.cfg pipe_best.cfg
git mv meas_worst.table pipe_best.table
git commit -a

Search and replace in source code and docs (commit)

This step is helped immensely by using an editor that can do search-and-replace across all files in a package. In your local pipe_best branch:

  • Change meas_worst to pipe_best in the base level Sconstruct file, and possibly also in other Sconscript files as well.
  • In python code, Change lsst.meas.worst to lsst.pipe.best and any related import lsst.meas.worst as measWorst aliases.
  • In C++ code and headers, change any namespace meas { namespace worst blocks to namespace pipe { namespace best, and also change any meas::worst explicit namespaces.
  • Finally, replace any other references to meas_worst with pipe_best, including, but not limited to, docstrings, comments, Config keys and values, and getPackageDir() calls. Be thorough in your search.

Commit these changes, and push your branch.

Update lsstsw/etc/repos.yaml

On your local lsstsw clone, create a branch for this ticket, and add a new pipe_best entry to lsstsw’s repos.yaml that points to http://github.com/lsst-dm/pipe_best. Create a Pull Request for your branch on github, and if it passes Travis you are free to merge it to master (further details on the Adding New Package page).

Do not delete the meas_worst entry yet.

Deprecate old package

On your local ticket branch in meas_worst, add a deprecation note to the top of the README file, and add the following to each of the __init__.py files in the python/meas sub-directories:

raise ImportError("This package is being renamed to pipe_best! Do not use!")

Commit those changes and push your branch.

This will help you identify packages that depend on meas_worst, as those packages will break as soon as they attempt to import any portion of it.

Branch dependent packages

Create tickets/DM-NNNN branches for those packages that you know are dependent on meas_worst (you can either create new local clones, or just use the versions in lsstsw/build). Any packages that you weren’t aware of will be discovered when you run Jenkins in a moment.

Update dependent packages

In your local ticket branch of each of the dependent packages:

  • Update the ups dependencies in the ups/PACKAGE.table file: setupRequired(meas_worst) -> setupRequired(pipe_best) and in the dependencies section of ups/PACKAGE.cfg (if necessary).
  • Change any python import statements and namespaces, and any C++ include files and namespaces (top-level or explicit).
  • Commit and push your branch.

Test in Jenkins

You can test the individual dependent packages one at a time, but you also need to test everything in Jenkins to ensure you haven’t missed any dependent packages. Because you’ve added pipe_best to repos.yaml on master and done all of the above work on one ticket branch, you can submit a Jenkins job for your branch and it will test all of your changes, plus it will make it clear if you’ve missed anything because of the ImportError statements in meas_worst.

Update confluence package history page

Add another entry to the confluence package history table, noting the date you expect the code review and merge for this package rename to be complete.

Get reviewed

Once Jenkins passes, including all the demos, and you’ve pushed your changes to all of the dependent package branches, have your ticket reviewed. This step should not be too difficult for the reviewer, even though many packages have changed, as the individual changes should be small. You can point the reviewer to this document for them to refer to during the review (e.g. to check for file renames and content changes being part of the same commit).

Post on Community and Slack

To ensure that other developers are aware of the pending change, post to the appropriate rooms on Slack (e.g. dm) and write up a short Community post describing the change and any caveats that other developers should be aware of.

Merge to master and move packages on github

Once your review is complete and you’ve announced the move as described above, you can merge your branches to master. But merging to master isn’t the final step.

All LSST dependencies need to live in the lsst github organization. In order to keep our release system happy, you will also need to move meas_worst and pipe_best between organizations via the github transfer repository instructions. Because github puts in an automatic redirect as part of those instructions, people with clones pointing to the pre-move repositories will not have to change their clone remote links. You may need the help of a senior developer/manager in order to complete this move step, as the person doing each move needs to be an administrator of both the source and destination organziation.

  1. Move meas_worst from lsst to lsst-sqre.
  2. Move pipe_best from lsst-dm to lsst.
  3. Move meas_worst from lsst-sqre to lsst-dm.
  4. Update lsstsw/etc/repos.yaml to point both meas_worst and pipe_best to https://github.com/lsst/pipe_best.git.

The latter step is safe for our release and build systems because our they uses the name in repos.yaml as the clone directory and eups product. Thus, old tags of pipe_best will work as meas_worst (the internal names/references will still exist as meas_worst), and so old tags will still build.

Merging in work that had started on the old package

Once your rename has been merged to master, other developers may still have open branches on meas_worst that they will want to move to pipe_best. Because you did the various steps above as individual commits, they should be able to rebase cleanly. The first step the other developer should do is to clone pipe_best and check that it has all the changes in their branch:

  1. Clone pipe_best: git clone https://github.com/lsst-dm/pipe_best.git
  2. Checkout the branch: git checkout tickets/DM-MMMM and compare it with the work-in-progress branch of meas_worst.

If the branches do not match, (i.e. if the other developer had not pushed all changes to meas_worst before the fork was created), they will have to follow this procedure to get their latest changes and commits into pipe_best:

  1. Commit any changes and push the branch on meas_worst to github to preserve them.
  2. Change the meas_worst clone’s remote: git remote set-url origin https://github.com/lsst-dm/pipe_best.git
  3. Push the branch to the new remote git push --set-upstream origin tickets/DM-MMMM. Do not pull or push master! The goal is to update pipe_best with the branch’s changes, but to not change anything else.
  4. Update the checked-out branch on the pipe_best clone created above: git pull
  5. Check that the branch in the new clone matches the branch in meas_worst, and if so, continue with the steps below. If the branches still don’t match, please ask for help from another developer.

If the branch in meas_worst and the branch in the new clone of pipe_best contain the same set of changes (this will be the case if the other developer had pushed all of their changes to their branch of meas_worst before you created the fork, or they had followed the above steps if not), the rest of the merging process is straight forward:

  1. Rebase the new pipe_best clone to master: git rebase master
  2. Fix any conflicts. There may be a few, if the branch has modified lines near lines that were changed during the rename.
  3. Commit and push the branch to pipe_best, and continue working on the new pipe_best clone. The other developer can delete their local meas_worst clone.

Post-move cleanup

Once you are reasonably confident that there is nobody working on meas_worst and that all relevant work has been moved to pipe_best, you can delete meas_worst from lsst-dm, and change your pipe_best remote to point to its final resting place at https://github.com/lsst/pipe_best.git.